Product Feathers
- Controller and Access Control Operation
- Electronic rotation detection - no mechanical microswitches required
- Bi-directional interface - an isolated dry contact signal activates the turnstile - no added interface relay required
- Turnstile automatically relocks in 20 seconds if no passage after activation output to access control provider and/or remote counting system
Tandem Full Height Turnstiles
Model: G535D
The Tandem GS full height security turnstiles are designed to control pedestrians entering or exiting restricted areas where perimeter control is required. This turnstile can be used for bi-directional pedestrian access control applications. The turnstile has been designed as a modular system and can easily be assembled on site by hand and without the need of heavy lifting devices. The turnstile consists of an outer cage section and a centre column incorporating a 3 x 120° offset ‘U’ bar configuration.
|
GS Full Height Turnstiles Elegance Durable Reliability
|
| Product Name | Full Height Turnstile(Single Walkway) |
| Size | 1400mm*1200mm*2310mm |
| Unlock | 0.2s |
| Throughout Rate | 30 person/minute |
| Lane’s width | 600mm |
| Power Supply | 110v-240V |
| Power Rating | Standby or Passage 50Va (Alarm Condition 50Va) |
| Logic Voltage | 24Vdc |
| Orientation | Pass left or Pass Right |
| Drive | Manually Operated |
| Function | Passage in both directions, electronically controlled |
| Security | Passage through the “dead area” is prevented by stator bars |
| Power Failure | In the event of power failure, 2 methods to make the full height turnstile free for entry and exit |
| Operating Temperature | 0 to 55°C |
| Transportation and Storage | -25 to +55° C |
| Relative Humidity | 95% Maximum |
| Motor Voltage | 24V |
| Control Panel Voltage | 12V |
| Material | Stainless Steel, Mild Steel & Powder Coating (Optional) |
| Enviroment | -25-+70 |
| Power Consumption | 35W |
| Prectection level | IP54 |
| Material weight | 325Kgs |
| Frequency | 50~60hz |
| Input Signal | 12V Dry Contact, RS485, TCP/IP |
Product Feathers
– Controller and Access Control Operation
– Electronic rotation detection – no mechanical microswitches required
– Bi-directional interface – an isolated dry contact signal activates the turnstile – no added interface relay required
– Turnstile automatically relocks in 20 seconds if no passage after activation output to access control provider and/or remote counting system
– Field activation test buttons allow testing of turnstile functionality separate from access control system
– “Attendant Override” input accepts dry contact signal to allow attendant to bypass the accesscontrol system and unlock the turnstile
Options
– Card Reader Mounting
– Surface mounting only of customer supplied readers
– Status Lights(Optional)
– Upon authorization a Green arrow will illuminate in the direction of passage authorization whilst in the opposite direction a Red Cross symbol will illuminate to indicate the unit is not available for use or is already in use.
– Push Button Control
– Simple Push Button Console
– Free Rotation
– In the event of an emergency or isolation of the power supply the turnstile arm will create a clear walkway for escape.
– Fire Control
– It has far end control function for down/up rod to meet the special requirements of the users and the fire control
Tandem Full Height Turnstiles Users Includes
Government Retail/Finance/Telecommunications/Information Technology /Banking /PublishingLeisure/Petrochemical/Education etc.
System workflow
Installation
Full Height Turnstile GS535 Installation Steps:
Note: The label on the part is the order of the assembly
Dimension
